Tackle Your Projects With The Best Reciprocating Saw You Can Get

Any handyman will tell you that if you’re hoping to tackle big projects that require a lot of cutting, you’re going to want to have the best reciprocating saw on hand. These saws can make your job a whole lot easier, but you’ll also be able to get more precise cuts than what you’d achieve with other types of saws.

It’s important that when you are choosing the best reciprocating saw that you know what features to look for, but also which type of reciprocating saw (corded or cordless) you need.

*Notice: On mobile devices, scroll right to see entire table.

Which Is The Best Reciprocating Saw Option, Corded Vs. Cordless

When you’re trying to figure out which is the best reciprocating saw for the money you’re about to spend, you first need to choose which type of saw you need:

Corded reciprocating saws are going to have a lot more power to work with, allowing you to cut heavy duty materials with an unlimited power supply. That means you can work for hours without stopping if you wanted to. Also, because these tools do not use a battery, it will usually be lighter for the user to carry.

Maintain And Clean Your Reciprocating Saw

Cordless reciprocating saws are going to give you the freedom from going from one project to the next without worrying about being close to a power supply. The best battery powered reciprocating saw is going use a lithium ion battery, as these units tend to hold a charge much longer than other varieties.

What To Look For When Choosing The Best Reciprocating Saw

After you decide which saw you want to work with, corded or not, the decision making doesn’t stop there. You’re still going to have a variety of options for you to consider. You can make this choice a little simpler when you know what features are important and what to look for in the tool you want to purchase.

Here are some key elements you should look for when shopping for a new reciprocating saw:

Check The Best Selling Reciprocating Saws On Amazon

amazon bestseller

Amperage/Battery Voltage

This is in reference to how much power the tool will have. Typically, these tools will range between 9 to 15 amps of power. The higher the amp/volt means it is going to be more powerful than that of a lower number. However, this also means it is going to be more expensive.

It’s important that you take that into consideration when you are trying to figure out the best price on reciprocating saws that will suit your needs.

Source: homedepot.com

Source: homedepot.com

Speed Control

The speed control indicated by SPM (Strokes per minute). The higher this number is, the faster you will be able to cut things. Typically, a reciprocating saw will be between 2,300 – 3,000 SPM.

Flexible Blade Positioning

By having the ability to position the blade (also called the shoe), you can adjust how deep the saw makes. This can also make the tool more stable while you’re working, giving you smoother and more precise cuts.

Auto Stop Option

This feature will stop the saw automatically when you want to change the blade or inspect your work. Also, this feature will prevent the gears from being damaged should the blade bind up.

Anti-Vibration System

This is system is going to reduce the amount of vibration you’ll feel while working with the saw, thus reducing user fatigue. With this feature, you’ll be able to work longer before needing to stop for a break.

DEWALT Bare-Tool DC385B

Source: homedepot.com

Orbital Cutting Action

If you don’t want to be standing over your material waiting for the saw to cut through for a long time, you will want an orbital reciprocating saw. This means the blade is going to move in an oval shape instead of just up and down. This is going to allow the saw to cut through the material much faster and more efficiently.

Blade Size

The size of your blade is going to make the difference in what kind of materials you can cut, but also how quickly you can cut those materials.

Stroke Length

The stroke length is in reference to how far the blade travels. The more travel the blade has at a single pass, the more teeth will cut into the material, which hastens the cutting process. This can be range between 7/8 of an inch up to 1 1/4 inch.

Blade Changing Mechanism

Some tools will have a lever that you can disengage the blade with, while others will have a locking mechanism where you have to twist it to release the lock. Many prefer the lever option because it’s easier and safer to use.

Lithium Bare Reciprocating Tigersaw

Source: sawreviewed.com


This isn’t necessarily a make-or-break factor when choosing the best reciprocating saw. Some tools will come with a canvas bag, some will come with a hard case me from plastic or metal, while others will have no case at all. If you’re concerned about how you’re going to store your tool, this may be something you’ll want to take into consideration.

Now that you know what to look for, let’s take a look at our top five favorite reciprocating saws.

Best Corded Reciprocating Saw

Here's our recommendation for the best corded reciprocating saws:

Winner: Makita AVT Recipro Saw

The Makita AVT Recipro Saw is a tool that utilizes a 15 amp motor that is capable of doing 2,800 strokes per minute. At 1 1/4-inch strokes, you can bet that you’re going to be able to cut through material quickly and efficiently every time.

Recipro Saw - 15 AMP

Source: makitatools.com

With this saw, you have the ability to choose between 6 different speed settings so you can tackle even delicate jobs with ease. The saw also has a 4-position orbital/straight cutting options that you can choose from that best suits the task at hand.

Notable Features Of The Makita AVT Recipro Saw Include

  • Anti-vibration technology for 2x less vibration
  • Powerful 15.0 AMP motor with 0-2,800 SPM
  • ​Electronic speed control maintains constant speed under load
  • ​Built-in clutch reduces gear damage by disengaging gears if blade binds
  • 4-position orbital/straight cutting action
  • ​Variable speed control dial enables user to match the speed to the application
  • Long 1-1/4" stroke for faster cutting
  • "Tool-less" blade change and shoe adjustment
  • Ergonomically designed rubberized grip for more comfort


With this saw, you don’t have to worry about the gears getting damaged should the blade bind up because the unit features a unique clutch system. Also, the anti-vibration mechanism and counter balance features of this saw makes it possible for more efficient cutting, for longer periods of time.

You’ll quickly discover that you’ll be breezing through material and finishing your project in no time. When looking at what people had to say about the Makita AVT Recipro Saw they had great things to say.

Recipro Saw - 15 AMP

Source: makitatools.com

Our Rating

The vast majority of customers who have purchased this saw left glowing reviews for the unit. These folks really appreciated the power behind the tool, as they were able to cut through cast iron and steel without any problems.

They also appreciated the anti-vibration feature of the tool because they could work continuously for a decent period of time without needing to rest because the vibrations were too strong.

There were a couple of people who did have some problems with this tool. These people felt that the tool was too powerful, even on the lowest speed setting. They felt that they couldn’t do delicate cuts with the saw. Some said that the tool was difficult to use in a demolition situation because it would go through blades very quickly whenever they hit a nail while cutting.

Runner Up: Bosch 14 AMP Reciprocating Saw

The Bosch 14 AMP Reciprocating Saw weighs about 8 pounds, which may be heavy by some standards, but that weight is what is going to help you cut through whatever you need cutting. Combine that weight with the powerful 14 amp, soft start motor and you’ll find that you’re cutting through thick, dense material with ease.

Bosch saw.

Source: homedepot.com

Speaking of the soft start motor, when you press on the trigger, the saw will take a second or two to reach maximum speed, which makes it safer to use.

Notable Features Of The Bosch 14 AMP Reciprocating Saw Include

  • High Power 14 Amps to through hard / dense materials with ease
  • Vibration Control System to reduce vibration to a minimum
  • ​Best Power to Weight Ratio - 14 Amps of power and weighing only 8-pounds
  • Constant orbit - optimizes performance and speed
  • ​Constant Response Electronics - Keeps tool running at constant speed under load


The saw combines a constant orbit motion with constant response electronics. These two features will give you the power you need, every step of the way. The constant response electronics ensures that while you are making those cuts, regardless of what it is that you’re cutting, it isn’t going to slow down. This means you’re going to get an even cut every time.

When looking at what people had to say about the Bosch 14 AMP Reciprocating Saw they had great things to say. Customers like that this saw has a 12 foot cord so they aren’t so limited to where they can work.

Bosch RS428 14 Amp

Source: boschtools.com

Our Rating

People also liked that the saw was as sturdy as it was powerful without being too unwieldly while using it. They mentioned that because of the 14 amp motor, they were able to power through difficult materials with ease.

At the other end of the spectrum, some people weren’t as pleased with this saw. These people found that the tool would get very hot after using it for 30 minutes. Some reported that it would get so hot that they couldn’t hold it anymore.

Others didn’t like that the toolless blade clamp was difficult to loosen. They found it frustrating that they had to fight with the clamp so they could change the blade and continue their work.

Best Cordless Reciprocating Saw

Here's our recommendation for the best cordless reciprocating saws:

Winner: DeWalt Bare-Tool 18V Cordless Reciprocating Saw

When it comes to choosing the best reciprocating saw brand, you can’t get much better than DeWalt. This tool features a blade where you can adjust its position. You have the ability to cut horizontally or vertically while the unit is in motion.

DeWalt Cordless Reciprocating Saw Review

This will ensure that every cut you make is both flush and smooth. Should your blade break, you can use the blade release lever so you can quickly and easily release and change the blade.

Notable Features Of The DeWalt Bare-Tool 18V Cordless Reciprocating Saw Include

  • Plastic / Metal
  • 1-1/8-inch stroke length and 0-3,000 rpm for faster cutting speed
  • ​4-position blade clamp allows for flush cutting and increased versatility
  • ​Lever-action keyless blade clamp for quick and easy blade changes
  • Anti-slip comfort grip provides increased comfort and control
  • ​Pivoting adjustable shoe with open top for maximum visibility
  • 1 year free service contract
  • 3 year limited warranty


Not only is this saw designed for versatility, but it also has a couple safety features that makes this unit stand out from others on the market. The tool features an electric brake system that will stop the blade immediately so you can change the blade if you need to without worrying about cutting yourself.

Also, the tool features a thick, rubber, anti-slip grip that you can hold on to for maximum control without worrying about your hand slipping on those tougher cuts.

DEWALT Bare-Tool DC385B 18-Volt Cordless Reciprocating Saw

Source: homedepot.com

Our Rating

When looking at what people had to say about the DeWalt Bare-Tool 18V Cordless Reciprocating Saw they had great things to say. Customers report that with this saw, they are able to cut through a wide variety of materials without any complications.

Some even went on to say that they will reach for this saw time and time again instead of their circular, miter or jig saws. They also like that even though the tool is solidly built, it is still portable and comfortable to work with.

There were some people who were less than impressed with this tool. These people said their tool stopped working after the 1 year service contract, causing them to pay out of pocket for the repairs, which were almost the same price as the tool itself.

They also said that even when using a fully charged battery, they can only get about 15 minutes before they have to switch out batteries because it no longer has any power.

Runner Up: Porter Cable 20V MAX Lithium Bare Reciprocating Tiger Saw

The Porter Cable 20V MAX Lithium Bare Reciprocating Tiger Saw is a tool that gives you the freedom of going wherever your job takes you without needing a long extension cord that you could trip over. This tool uses a powerful 20V max lithium battery that can hold a charge up to 18 months in between uses.


This means that even though you may not use the tool all the time, you can rest assured in knowing that the saw will be ready to go whenever you need it to. The motor in this unit can reach up to 3,000 strokes per minute, meaning you can cut through any material that much quicker.

Notable Features Of The Porter Cable 20V MAX Lithium Bare Reciprocating Tiger Saw Include

  • High Performace Drivetrain delivers 1" stroke length and 0-3,000 SPM
  • Compact design allows tool to reach tight spaces
  • ​Tool Free Blade Release
  • ​Variable-speed trigger
  • Part of the 20V Max System
  • ​3 Year warranty


Not only does the tool run off of a long-lasting battery, you don’t have to worry about carrying around special tools with you to be able to change the blade or adjusting the shoe. This tool free blade releasing mechanism lets you change the blade in the middle of a project quickly and easily, giving you the ability to get back to work in a matter of minutes.

When looking at what people had to say about the Porter Cable 20V MAX Lithium Bare Reciprocating Tiger Saw they had great things to say. Customers liked that the saw was quite powerful, despite being a cordless unit.


Our Rating

They mentioned that they were able to cut through a variety of materials quickly and easily. They also report that the battery was able to hold a charge long enough to complete a job all in a single charge.

Other customers were not as happy with this product. These customers were disappointed that their saw would not cut through anything other than wood. Some even said that they had trouble working through a 4x4 without the saw hesitating or stopping all together.

One customer reported that when they did try cutting through the wood, the stroke arm came loose and the whole tool fell apart. Others reported that the vibration caused by this tool was so intense, it was difficult to manage the tool for any amount of time.

Best Reciprocating Saw Kit

Here's our recommendation for the best reciprocating saw kit:

Milwaukee M18 Fuel Reciprocating Saw Kit

The Milwaukee M18 Fuel Reciprocating Saw Kit isn’t like your typical cordless reciprocating saw. The tool features Quik-Lok blade changing mechanisms that uses a spring loaded slide that can rotate to the front of the tool.

Milwaukee 2720-21

Source: tools-plus.com

This allows you to put the blade in forward or reversed, although you cannot use it sideways. This mechanism is pretty substantial, which means you don’t have to worry about the blade releasing accidentally while the saw is in use.

Notable features Of The Milwaukee Reciprocating Saw Kit Include

  • Delivers the fastest cutting speed in its class, increased power and the durability of corded saws
  • Brushless motor: supplies constant power for faster cuts and reduced heat for extended life
  • Intelligence: provides optimized performance and overload protection using total system communication


The saw runs off of a 4.0 Ah battery, which when fully charged, you will be able to make upward to 80 consecutive cuts (if cutting a 2x4) with an aggressive blade. The actual number of cuts you’ll be able to make on a single, fully charged tool will depend on the material you’re cutting.

The tool features an adjustable foot that pivots that you can control with a lever that is easily accessible on either side of the tool.

When looking at what people had to say about the Milwaukee Reciprocating Saw Kit they had great things to say. Customers appreciate that this kit comes with everything you need for this tool to work—a sturdy carrying case, a battery charger, battery, blade and the tool.

Reciprocating Saw Kit with 1 Battery

Our Rating

Customers report that they were able to cut through thick trees and plants with no problem, thanks to the strong motor. People also like that the battery lasts a long time and they are able to tackle 3/4 of a project before changing a battery.

There were a few people who were not impressed with the Milwaukee M18 Fuel Reciprocating Saw Kit. These people commented that the battery takes too long to charge, and it doesn’t hold a charge after using the tool for a month.

Some people commented that their tool did not come with the hard plastic tool case, but instead came with a bag. One customer reported that their tool would hesitate or shut off completely when trying to run the tool at full throttle.

Our Recommendation

Working on projects around the home or even at the job site is going to require the proper tools. When you have the best reciprocating saw at your disposal, you’ll be able to tackle almost anything. However, trying to choose what is the best reciprocating saw on the market isn’t always all that easy. However, we do have a couple top recommendations.

Bosch RS428 14 Amp Reciprocating Saw

If you’re hoping to find the best rated reciprocating saw that will allow you to go for long periods of time with consistent speed and without having to change a battery, you’re going to want the Makita AVT Recipro Saw.

However, if you don’t want to be tethered to an outlet and want to be able to go from one task to another quickly and easily, we recommend opting for the DeWalt Bare-Tool 18V Cordless Reciprocating Saw.

Whichever tool you do decide, we are certain you’ll feel that awesome sense of accomplishment when you look at your completed project, knowing that you did it yourself!